Skip to content
-
Features
- Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
- Stainless steel shaft and ball bearing - ball bearing with Simmer ring
- Rotor with shaft and permanent magnet mounted in pre-chamber
- Sensor circuit consisting of ASIC
- Hall elements and interface electronics in enclosed main chamber
- Housing protection type IP 69K additionally cast
- Electrical connection via cable (open cable ends)
-
Features
- Strain gauge input, 6-wire connection
- Input pt100 and thermocouples (J and K)
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- Adjustable bridge voltage 3 VDC to 10 VDC
- 1 … 10 mV sensitivity
- Standard installation housing with 96 x 48 mm and protection class IP65
- Bright and high-contrast graphic display with event-dependent color variants
- Emulation of a 7-segment display with symbols and units
- Intuitive and simple parameterization through plain text and touchscreen
- Numerous functions such as tare, filter, averaging
- Linearization with 24 support points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
- Option IO: IO-Link Device V1.1
Options can be combined.
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
- SSI clock frequencies up to 1 MHz
- Master or Slave operation
- For single-turn and multi-turn encoders with 10 … 32 Bit
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent color variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Operating modes such as scaling and bit blanking
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputsOptions can be combined.
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
- SSI clock frequencies up to 1 MHz
- Master or Slave operation
- For single-turn and multi-turn encoders with 10 … 32 Bit
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 5 / 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent color variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Operating modes such as scaling, bit blanking and wire break monitoring
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Pulse input with format A, B, 90° [HTL], single channel as an option
- HTL input for encoder and sensors with NPN / PNP or NAMUR switching characteristics
- Input frequency up to 250 kHz
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent colour variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Multi-function device for use as speedometer/tachometer, pulse counter/position indicator, number counter and total counter
- Operating modes such as scaling, average filter, start-up suppression
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined.
-
Features
- Incremental input with format A, /A, B, /B
- Differential, single-ended HTL / RS422
- Input frequency up to 1 MHz
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent colour variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Multi-function device for use as speedometer/tachometer, pulse counter/position indicator, number counter and total counter
- Operating modes such as scaling, average filter, start-up suppression
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined.
-
Features
- Ultra Miniature Size
- High reliability with mounting the Opt-ASIC (by components quantities decreased)
- Low torque and low inertia
- High signal accuracy
- Type: 12SA
- Pulse: 100-256
- Outer Diameter: φ12
- Ingress Protection: IP00
-
Features
- Ultra Miniature Size
- Shaft Diameter of 2.5mm available
- Type: 18M
- Pulse: 200-1600
- Outer Diameter: φ18
-
Features
- Ultra Miniature Size
- A shaft Diameter of 2.5mm is available
- Type: 18S
- Pulse: 100-1600
- Outer Diameter: φ18
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38H
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38S
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38SG
- Pulse: 100-2048
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Ultra-miniature size
- OD 7.2mm
- Height 10.5mm
- High Resolution
- Up to 400 resolution
- Pulse: 100～400
- Type: 7s
- Outer Diameter: φ7
-
Features
- Compact high-speed type
- Type: OEZ
- Pulse: 36-1500
- Outer Diameter: φ28
- Ingress Protection: IP50
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
Page load link
