Skip to content
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- Low profile 30.3mm
- Up to 12 pole commutation
- Thru-bore and hollow-bore (blind) styles
- Simple, innovative flexible mounting system
- Incorporates Opto-ASIC technology
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 2Ncm (typical)
- Inertia: 100gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Stainless Steel (316)
- Cover: Stainless Steel (316)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing + Single lip seal
- Rear: Single lip seal on the rear of the cover
- Protection: (IP66 / IP67)
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM
- Torque: 4Ncm (typical)
- Inertia: 200gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Size 25 / 63.5mm Diameter (Hollow Shaft)
- Up to 12 Pole Commutation Available
- Thru Bore and Blind Bore Options
- Simple, Innovative Flexible Mounting System
- Incorporates Opto-ASIC Technology
-
Features
- Thru-bore design for easy mounting
- Bore options to 1.375" and 32mm
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- 100° C operating temperature available
-
Features
- Slim profile—only 34.5mm in depth
- Thru-bore design for easy mounting
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- Bore options to 1.875" and 43mm
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing
- Rear: Single lip seal on the rear of the cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 3Ncm (typical)
- Inertia: 600gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Low profile—40mm
- Thru-bore or hollow-bore styles
- Industrial-grade, heavy-duty housing
- State-of-the-art Opto-ASIC circuitry
-
Features
- Number of output pulses per revolution 5.000 - 500.000 ppr
- Line number on disc (z) 5.000
- Maximum shaft speed 8000 rpm
- The permissible motion of the shaft
- axial: ± 1.00 mm
- radial: 0.02 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.8 kg
- Operating temperature -20...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- The permissible motion of the shaft
- axial: ± 0.5 mm
- radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Standard Size 36mm package (1.42")
- Durable magnetic technology
- Multiturn absolute encoder (12-bit/39-bit)
- SSI and CANopen communications
- Proven new turns counting technology — no gears or batteries
-
Features
- Multi-Turn Absolute Encoder (14 Bit/39 Bit)
- SSI and CANopen Communications
- 58 mm Diameter
- Durable Magnetic Technology
- Proven Turns Counting Technology – No Gears or Batteries
- Retains Absolute Position After a Power Outage
-
Features
- Standard Size 36mm package
- Durable magnetic technology
- Up to 14 bits of single-turn resolution
- SSI and CANopen communications
- Proven turns counting technology—no gears or batteries
- Flex mount eliminates couplings and is ideal for motors or shafts
-
Features
- Up to 14 Bits of Single-Turn Resolution
- SSI and CANopen Communications
- 58 mm Diameter
- Durable Magnetic Technology
- Retains Absolute Position After a Power Outage
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Control input „Error Release“ for PNP signals [10 ... 30 VDC]
- Input frequency up to 400 kHz
- Pulse output with format A, /A, B, /B, Z, /Z [RS422] or with format A, B, 90° [HTL]
- Output frequency up to 4 MHz [RS422]
- Control output „Error“ with push-pull characteristic, short-circuit-proof, [5 ... 30 VDC]
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Adjustable multiplier for interpolation rates from 1:5 to 1:50
- Adjustable divider 1:1 – 1:255 to reduce the output frequency
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 2 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- 2 pulse outputs with format A, /A, B, /B, Z, /Z [RS422, TTL, HTL]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardised switch panel housing
- LED display 6 decades with 15 mm digit height
- Display range -199999 ... 999999 with 6 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 output relays with potential-free changeover contact
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- 4 preselector switches on the front
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
Page load link