Skip to content
-
Features
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- SSI clock frequency up to 1 MHz
- Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via operator software OS6.0
- Serial RS232- / RS485 interface
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- Start-stop interface for absolute transducers and magnetostrictive sensors
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single-channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 1300 nm
- Transmission distance up to 3000 meters
- Power supply 5 VDC (for LW213)
- Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibres are available
-
Features
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 1300 nm
- Transmission distances up to 3000 meters
- Power supply 5 VDC (for LW214)
- Power supply 10 ... 30 VDC (for LW214-1, LW214-2)
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibers are available
-
Features
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 850 nm
- Transmission distance up to 2000 meters
- Power supply 5 VDC (for LW215)
- Power supply 10 ... 30 VDC (for LW215-1, LW215-2, LW216-3)
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibers are available
-
Features
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 850 nm
- Transmission distance up to 2000 meters
- Power supply 5 VDC (for LW216)
- Power supply 10 ... 30 VDC (for LW216-1, LW216-2)
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibers are available
-
Features
- 1 SSI input / output channel [RS422] with format DATA+, DATA-, CLOCK+, CLOCK-
- 1 Error input (LW217) resp. 1 open-drain-output (LW218)
- Maximum input frequency 1 MHz
- Very short conversion time < 300 nsec.
- Optical wavelength 850 nm
- Transmission distance up to 2000 meters
- Power supply 5 VDC (for LW217)
- Power supply 10 ... 30 VDC (for LW217-1)
- Free adjustable SSI resolution from 1 ... 99 bit
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibres are available
-
Features
- 1 SSI input / output channel [RS422] with format DATA+, DATA-, CLOCK+, CLOCK-
- 1 open-drain-output (LW218)
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 1300 nm
- Transmission distance up to 2000 meters
- Power supply 5 VDC (for LW218)
- Power supply 10 ... 30 VDC (for LW218-1)
- Free adjustable SSI resolution from 1 ... 99 bit
- Snap-on housing for top-hat rail (according to EN 60715)
- Glass fibre cables are available ready-assembled
-
Features
- Profinet interface
- 3 control inputs for remote release
- Power supply 18 ... 30 VDC
- Norm panel housing with 96 x 48 mm and protection class IP65
- Bright and high-contrast graphic display with event-dependent color variants
- Emulation of a 7-segment display with symbols and units
- Intuitive and simple parameterization through plain text and touchscreen
-
Features
- 20-bit parallel input with format BCD, binary or Gray-Code
- Input frequency: fast encoder 5 kHz, auto-transmit / data logging 0.5 kHz
- 4 status outputs, with push-pull characteristics, short-circuit-proof [5 ... 30 VDC]
- Power supply 10 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Serial RS232 / RS485 interface
-
Features
- Pulse input with format A, B, Z [HTL] (10 ... 30 V)
- Input frequency max. 200 kHz
- Pulse output with format A, /A, B, /B, Z, /Z [RS422 / TTL]
- Power supply 5 VDC
- Converts HTL levels (A / B / Z) in TTL / RS422, incl. the inverted signals
- Converts also static/separate directional information into a dual channel A / B signal with a 90° phase shift
- Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
-
Features
- Pulse input with format A, /A, B, /B, Z, /Z [TTL / RS422]
- Input frequency max. 200 kHz
- Pulse output with format A, B, Z [HTL]
- Power supply 10 ... 30 VDC
- Converts TTL / RS422 signals (A, /A, B, /B, Z, /Z) in HTL format with an output level of 10 ... 30 VDC
- Generates additionally an A / B directional information with 90° phase shift‚ a static HIGH / LOW directional signal or separate directional pulses
- Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
- Input frequency up to 500 kHz
- 1 pulse output with format A, /A, B, /B, Z, /Z [RS422, HTL]
- Power supply 5 ... 30 VDC
- Potential separation between input and output
- Possibility to convert A, B / 90 ° directional information into static directional signal and vice versa
- Connections on the input as well as on the output either via sub-D plugs or plug-in screw terminals (parallel connections)
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 connector Sub-D-9 (male)
- 1 connector Sub-D-9 (female)
- cable length 3 m (approx. 10 feet)
-
Features
- Support brackets with a snap mechanism for easy installation of panel housings onto a 35 mm DIN rail (according to EN 60715)
- Suitable for display units with front dimensions of 96 x 48 mm
-
Features
- Support brackets with a snap mechanism for easy installation of panel housings onto a 35 mm DIN rail (according to EN 60715)
- Suitable for display units with front dimensions of 96 x 96 mm
-
Features
- USB cable for connection between PC and the Motrona unit UZ210
- Both connectors are type A
- Cable length 2 m (approx. 6.5 feet)
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 … 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardised switch panel housing
- LED display 6 decades with 15 mm digit height
- Display range -199999 ... 999999 with 6 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 output relays with potential-free changeover contact
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- Scalable 14-bit analogue output ±10 V or 0/4 ... 20 mA
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- 4 preselector switches on the front
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardised switch panel housing
- LED display 6 decades with 15 mm digit height
- Display range -199999 ... 999999 with 6 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 48 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 output relays with potential-free changeover contact
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 output relays with potential-free changeover contact
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- 2 pre-selection switches on the front
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
-
Features
- 2 scalable inputs in format A, /A, B, /B [HTL / TTL / RS422, 1-lane, 2-lane, balanced or unbalanced]
- 4 control inputs for PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 1MHz
- 4 fast transistor outputs, push-pull, short-circuit proof [5 ... 30 VDC]
- 4 output relays with potential-free changeover contact
- 4 programmable limits
- Power supply 24 VAC and 17 ... 40 VDC
- Standardized switch panel housing
- LED display 8 decades with 10 mm digit height
- Display range -19999999 ... 99999999 with 8 decades
- 4 preselector switches on the front
- Serial RS232 interface
- Dimensions W x H x D = 96 x 96 x 140 mm
Page load link