Skip to content
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
- SSI clock frequencies up to 1 MHz
- Master or Slave operation
- For single-turn and multi-turn encoders with 10 … 32 Bit
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 5 / 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent color variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Operating modes such as scaling, bit blanking and wire break monitoring
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined
-
Features
- Pulse input with format A, B, Z [HTL] (10 ... 30 V)
- Input frequency max. 200 kHz
- Pulse output with format A, /A, B, /B, Z, /Z [RS422 / TTL]
- Power supply 5 VDC
- Converts HTL levels (A / B / Z) in TTL / RS422, incl. the inverted signals
- Converts also static/separate directional information into a dual channel A / B signal with a 90° phase shift
- Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
-
Features
- Pulse input with format A, /A, B, /B, Z, /Z [TTL / RS422]
- Input frequency max. 200 kHz
- Pulse output with format A, B, Z [HTL]
- Power supply 10 ... 30 VDC
- Converts TTL / RS422 signals (A, /A, B, /B, Z, /Z) in HTL format with an output level of 10 ... 30 VDC
- Generates additionally an A / B directional information with 90° phase shift‚ a static HIGH / LOW directional signal or separate directional pulses
- Open print version with plastic snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 pulse input with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
- Input frequency up to 500 kHz
- 1 pulse output with format A, /A, B, /B, Z, /Z [RS422, HTL]
- Power supply 5 ... 30 VDC
- Potential separation between input and output
- Possibility to convert A, B / 90 ° directional information into static directional signal and vice versa
- Connections on the input as well as on the output either via sub-D plugs or plug-in screw terminals (parallel connections)
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
Page load link
