Skip to content
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- Low profile 30.3mm
- Up to 12 pole commutation
- Thru-bore and hollow-bore (blind) styles
- Simple, innovative flexible mounting system
- Incorporates Opto-ASIC technology
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 2Ncm (typical)
- Inertia: 100gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Stainless Steel (316)
- Cover: Stainless Steel (316)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing + Single lip seal
- Rear: Single lip seal on the rear of the cover
- Protection: (IP66 / IP67)
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM
- Torque: 4Ncm (typical)
- Inertia: 200gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Size 25 / 63.5mm Diameter (Hollow Shaft)
- Up to 12 Pole Commutation Available
- Thru Bore and Blind Bore Options
- Simple, Innovative Flexible Mounting System
- Incorporates Opto-ASIC Technology
-
Features
- Thru-bore design for easy mounting
- Bore options to 1.375" and 32mm
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- 100° C operating temperature available
-
Features
- Slim profile—only 34.5mm in depth
- Thru-bore design for easy mounting
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- Bore options to 1.875" and 43mm
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing
- Rear: Single lip seal on the rear of the cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 3Ncm (typical)
- Inertia: 600gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Low profile—40mm
- Thru-bore or hollow-bore styles
- Industrial-grade, heavy-duty housing
- State-of-the-art Opto-ASIC circuitry
-
Features
- Number of output pulses per revolution 5.000 - 500.000 ppr
- Line number on disc (z) 5.000
- Maximum shaft speed 8000 rpm
- The permissible motion of the shaft
- axial: ± 1.00 mm
- radial: 0.02 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.8 kg
- Operating temperature -20...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- The permissible motion of the shaft
- axial: ± 0.5 mm
- radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Standard Size 36mm package
- Durable magnetic technology
- Up to 14 bits of single-turn resolution
- SSI and CANopen communications
- Proven turns counting technology—no gears or batteries
- Flex mount eliminates couplings and is ideal for motors or shafts
-
Features
- Up to 14 Bits of Single-Turn Resolution
- SSI and CANopen Communications
- 58 mm Diameter
- Durable Magnetic Technology
- Retains Absolute Position After a Power Outage
-
Features
- Strain gauge input, 6-wire connection
- Input pt100 and thermocouples (J and K)
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- Adjustable bridge voltage 3 VDC to 10 VDC
- 1 … 10 mV sensitivity
- Standard installation housing with 96 x 48 mm and protection class IP65
- Bright and high-contrast graphic display with event-dependent color variants
- Emulation of a 7-segment display with symbols and units
- Intuitive and simple parameterization through plain text and touchscreen
- Numerous functions such as tare, filter, averaging
- Linearization with 24 support points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
- Option IO: IO-Link Device V1.1
Options can be combined.
-
Features
- Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
- 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
- SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
- Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via operator software OS6.0
- Serial RS232- / RS485 interface
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- Start-stop interface for absolute transducers and magnetostrictive sensors
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- 1 incremental input (A, /A, B, /B)
- for HTL/TTL/RS422 for NPN/PNP/NAMUR encoders and sensors
- optionally 3 control inputs for PNP signals [10 ... 30 VDC]
- IO link interface
- Power supply 12 ... 30 VDC
- Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Control input „Error Release“ for PNP signals [10 ... 30 VDC]
- Input frequency up to 400 kHz
- Pulse output with format A, /A, B, /B, Z, /Z [RS422] or with format A, B, 90° [HTL]
- Output frequency up to 4 MHz [RS422]
- Control output „Error“ with push-pull characteristic, short-circuit-proof, [5 ... 30 VDC]
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Adjustable multiplier for interpolation rates from 1:5 to 1:50
- Adjustable divider 1:1 – 1:255 to reduce the output frequency
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 2 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- 2 pulse outputs with format A, /A, B, /B, Z, /Z [RS422, TTL, HTL]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
Page load link