Skip to content
-
Features
- Standard Size 25 package (2.5")
- Resolutions up to 12-bit (4096 counts)
- Incorporates Opto-ASIC technology
- Industrial-grade, heavy-duty housing
- Optional IP67 seal
-
Features
- Standard size 36 mm package (1.42")
- Durable magnetic technology
- Up to 14 bits of single-turn resolution
- SSI and CANopen communications
- Proven new turns counting technology — no gears or batteries
-
Features
- Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
- Stainless steel shaft and ball bearing - ball bearing with Simmer ring
- Rotor with shaft and permanent magnet mounted in pre-chamber
- Sensor circuit consisting of ASIC
- Hall elements and interface electronics in enclosed main chamber
- Housing protection type IP 69K additionally cast
- Electrical connection via cable (open cable ends)
-
Features
- Interface: SSI
- Design: 42mm
- Housing Material: Aluminium, stainless steel
- Flange & Shaft: Synchroniser flange
- Resolution: 4096 steps/360°<)
- Code type: Binary, Gray (optional)
- Electrical connection: Cable 1m
- Electrical and/or mechanical variant: Basic version
-
Features
- Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm)
- Stainless steel shaft and ball bearing - ball bearing with Simmer ring
- Rotor with shaft and permanent magnet mounted in pre-chamber
- Sensor circuit consisting of ASIC
- Hall elements and interface electronics in enclosed main chamber
- Housing protection type IP 69K additionally cast
- Electrical connection via cable (open cable ends)
-
Features
- 6-wire connection for one strain gauge full bridge sensor
- 4 control inputs [HTL/PNP]
- 1 analog output ±10 V, 0/4 ... 20 mA, 16 bit
- 4 control outputs for signalling different operation states
- Power supply 18 ... 30 VDC
- Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
- Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
- Sensitivity of the sensor inputs 1 ... 10 mV
- Transmission of the sensor data via RS485
- Programming via USB and the user interface OS (freeware)
- Protection class IP20
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- 6-wire connection for two independent strain gauge full bridge sensors
- 4 control inputs [HTL/PNP]
- 2 independent analog outputs ±10 V, 0/4 ... 20 mA, 16 bit
- 4 control outputs for signalling different operation states
- Power supply 18 ... 30 VDC
- Functions for scaling and linking the sensor signals (e.g. A+B, A-B, ...)
- Adjustable bridge voltage per sensor from 3 VDC ... 10 VDC
- Sensitivity of the sensor inputs 1 ... 10 mV
- Transmission of the sensor data via RS485
- Programming via USB and the user interface OS (freeware)
- Protection class IP20
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- Frequency inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
- 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
- SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- Input frequency up to 1 MHz [RS422], 200 kHz [HTL]
- Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via operator software OS6.0
- Serial RS232- / RS485 interface
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- Start-stop interface for absolute transducers and magnetostrictive sensors
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- 1 Strain gauge input
- 3 VDC and 10 VDC bridge voltage per sensor connection
- 1 … 10 mV sensitivity
- optionally 3 control inputs for PNP signals [10 ... 30 VDC]
- IO link interface
- Power supply 12 ... 30 VDC
- Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
-
Features
- 1 incremental input (A, /A, B, /B)
- for HTL/TTL/RS422 for NPN/PNP/NAMUR encoders and sensors
- optionally 3 control inputs for PNP signals [10 ... 30 VDC]
- IO link interface
- Power supply 12 ... 30 VDC
- Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
Page load link