Skip to content
-
Features
- 1 Strain gauge input
- 3 VDC and 10 VDC bridge voltage per sensor connection
- 1 … 10 mV sensitivity
- optionally 3 control inputs for PNP signals [10 ... 30 VDC]
- IO link interface
- Power supply 12 ... 30 VDC
- Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
-
Features
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single-channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 1300 nm
- Transmission distance up to 3000 meters
- Power supply 5 VDC (for LW213)
- Power supply 10 ... 30 VDC (for LW213-1, LW213-2, LW213-3)
- Snap-on housing for top-hat rail (according to EN 60715)
- Pre-configured optical fibres are available
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Internal power supply 3,3 V
- Ambient temperature 0° C ... +60° C / 32° F ... 140° F (operating), -40° C ... +70° C / -40 ... 158° F (storage)
- 9600 Bit/s ... 12 MBit/s Baud rates
- SUB-D-9-pin female, galvanically isolated
-
Features
- Internal power supply 3,3 V
- Ambient temperature 0° C ... +60° C (operating), -40° C ... +70° C (storage)
- 100 MBit/s Vollduplex
- 2 Ethernet-Ports RJ45 with integrated switch, galvanically isolated
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
- 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
- Pulse inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
- Analog output ± 10 V, 0/4 ... 20 mA, 16 bit
- Power supply 18 ... 30 VDC
- Compact housing for mounting on a 35 mm top-hat rail (according to EN 60715)
- Simple parameterization via the OS6.0 user interface
- Serial RS232 / RS485 interface
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- Encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Control input „Error Release“ for PNP signals [10 ... 30 VDC]
- Input frequency up to 400 kHz
- Pulse output with format A, /A, B, /B, Z, /Z [RS422] or with format A, B, 90° [HTL]
- Output frequency up to 4 MHz [RS422]
- Control output „Error“ with push-pull characteristic, short-circuit-proof, [5 ... 30 VDC]
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Adjustable multiplier for interpolation rates from 1:5 to 1:50
- Adjustable divider 1:1 – 1:255 to reduce the output frequency
-
Features
- 1 connector Sub-D-9 (male)
- 1 connector Sub-D-9 (female)
- cable length 3 m (approx. 10 feet)
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 2 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- 2 pulse outputs with format A, /A, B, /B, Z, /Z [RS422, TTL, HTL]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- 1 encoder input with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Maximum sinus input frequency 500 kHz with max. 200 ns conversion time
- 4 signal outputs with format SIN+, SIN-, COS+, COS-, REF+, REF- [1 Vss]
- Power supply 17 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
-
Features
- USB cable for connection between PC and the Motrona unit UZ210
- Both connectors are type A
- Cable length 2 m (approx. 6.5 feet)
-
Features
- USB cable for connection between PC operator software and Motrona DS device
- USB connector type A on type B
- Length 1,8 m
-
Features
- USB cable for connection between PC and Motrona devices of the series IV/FU/PV/ZU210 and IP/FP/PP/ZP210
- USB connector type A on type Mini B
- Length 1,8 m
-
Features
- Ultra Miniature Size
- High reliability with mounting the Opt-ASIC (by components quantities decreased)
- Low torque and low inertia
- High signal accuracy
- Type: 12SA
- Pulse: 100-256
- Outer Diameter: φ12
- Ingress Protection: IP00
-
Features
- Ultra Miniature Size
- Shaft Diameter of 2.5mm available
- Type: 18M
- Pulse: 200-1600
- Outer Diameter: φ18
-
Features
- Ultra Miniature Size
- A shaft Diameter of 2.5mm is available
- Type: 18S
- Pulse: 100-1600
- Outer Diameter: φ18
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38H
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38S
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38SG
- Pulse: 100-2048
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Ultra-miniature size
- OD 7.2mm
- Height 10.5mm
- High Resolution
- Up to 400 resolution
- Pulse: 100~400
- Type: 7s
- Outer Diameter: φ7
-
Features
- Compact high-speed type
- Type: OEZ
- Pulse: 36-1500
- Outer Diameter: φ28
- Ingress Protection: IP50
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
Page load link