Skip to content
Features
Very high-performance economical encoder
Low profile—25.4 mm height and 38 mm diameter
Thru-bore with sizes up to 10 mm
Simple, innovative flex mounting system (Global Mounting Standards)
Up to 12 pole commutation optional for brushless motor control
Features
Very high-performance economical encoder
Low profile—25.4 mm height and 38 mm diameter
Thru-bore with sizes up to 10 mm
Simple, innovative flex mounting system (Global Mounting Standards)
Up to 12 pole commutation optional for brushless motor control
Features
5mm Opto-ASIC encoder with a low profile (50.8mm)
Imperial bore sizes range from 0.625” to 1.125”
Metric bore sizes ranging from 6 mm to 28 mm
Single replacement solution for 50.8mm to 88.9mm encoders
Resolutions to 10,000 PPR, frequencies to 1 MHz
Versatile flexible mounting options
RoHS compliant
Corrosion-Resistant Option
Features
Low profile 30.3mm
Up to 12 pole commutation
Thru-bore and hollow-bore (blind) styles
Simple, innovative flexible mounting system
Incorporates Opto-ASIC technology
Features
Body: Precision Machined Aluminium
Cover: Precision Machined Aluminium (Powder Coated)
Shaft: Stainless Steel
Bearings: Ballraces
Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
Protection: IP65
Operating Temp: -20 to +60°C (Higher on request)
Maximum Speed: 3000 RPM (Higher on request)
Torque: 2Ncm (typical)
Inertia: 100gcm2 (typical)
Shaft Loading: Designed to support its weight
Cable: Screened, oil and salt waterproof
Impulse Frequency: Up to 300KHz (depending on model)
Current Consumption: 60mA (typical – without load)
Features
Body: Stainless Steel (316)
Cover: Stainless Steel (316)
Shaft: Stainless Steel
Bearings: Ballraces
Shaft Sealing: Front: Sealed bearing + Single lip seal
Rear: Single lip seal on the rear of the cover
Protection: (IP66 / IP67)
Operating Temp: -20 to +60°C (Higher on request)
Maximum Speed: 3000 RPM
Torque: 4Ncm (typical)
Inertia: 200gcm2 (typical)
Shaft Loading: Designed to support its weight
Cable: Screened, oil and salt waterproof
Impulse Frequency: Up to 300KHz (depending on model)
Current Consumption: 60mA (typical – without load)
Features
Size 25 / 63.5mm Diameter (Hollow Shaft)
Up to 12 Pole Commutation Available
Thru Bore and Blind Bore Options
Simple, Innovative Flexible Mounting System
Incorporates Opto-ASIC Technology
Features
Thru-bore design for easy mounting
Bore options to 1.375" and 32mm
Incorporates Opto-ASIC technology
Resolutions to 4096 PPR
100° C operating temperature available
Features
Slim profile—only 34.5mm in depth
Thru-bore design for easy mounting
Incorporates Opto-ASIC technology
Resolutions to 4096 PPR
Bore options to 1.875" and 43mm
Features
Body: Precision Machined Aluminium
Cover: Precision Machined Aluminium (Powder Coated)
Shaft: Stainless Steel
Bearings: Ballraces
Shaft Sealing: Front: Sealed bearing
Rear: Single lip seal on the rear of the cover
Protection: IP65
Operating Temp: -20 to +60°C (Higher on request)
Maximum Speed: 3000 RPM (Higher on request)
Torque: 3Ncm (typical)
Inertia: 600gcm2 (typical)
Shaft Loading: Designed to support its weight
Cable: Screened, oil and salt waterproof
Impulse Frequency: Up to 300KHz (depending on model)
Current Consumption: 60mA (typical – without load)
Features
Number of output pulses per revolution 5.000 - 500.000 ppr
Line number on disc (z) 5.000
Maximum shaft speed 8000 rpm
The permissible motion of the shaft
- axial: ± 1.00 mm
- radial: 0.02 mm
Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
Starting torque at 20°C ≤ 0.01 Nm
Rotor moment of inertia < 20x10-4 kgm2
Protection (housing) (IEC 529) IP64
Protection (shaft side) (IEC 529) IP64
Maximum weight without cable 0.8 kg
Operating temperature -20...+70°C
Storage temperature -30...+85°C
Maximum humidity (non-condensing) 98%
Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
Permissible shock (11 ms) ≤ 300m/s²
Features
Number of output pulses per revolution 100-108000 ppr
Maximum shaft speed 10000 rpm
The permissible motion of the shaft
- axial: ± 0.5 mm
- radial: ± 0.05 mm
Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
Starting torque at 20°C ≤ 0.025 Nm
Rotor moment of inertia < 1.5x10-4 kgm2
Protection (housing) (IEC 529) IP64
Protection (shaft side) (IEC 529) IP64
Maximum weight without cable 0.3 kg
Operating temperature -10...+70°C
Storage temperature -30...+80°C
Maximum humidity (non-condensing) 98%
Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
Permissible shock (5 ms) ≤ 1000 m/s²
Features
MC700 is a universal motion controller for 1 to 4 axes, which can be assigned any motion control functions by loading firmware. Together with the firmware BY701 (see firmware), this controller offers excellent synchronous functions for 1 - 4 axes.
The firmware offers all conceivable possibilities for the synchronization of drives, including the influence of phase position and the relative position between the drives and numerous index and print mark functions.
Optionally, a "physical master" or the built-in "virtual master axis" with programmable speeds and ramps can be used as the master drive.
The number of successive axes can be extended arbitrarily via a cascading output.
MC700 controllers can be operated via an external control terminal, serial interface or optional via CANBUS (MC700/CI). PC operator software is included.
PROFIBUS connection possible via gateway PB251 (see accessories)
Features
USB to RS232 converter (compatible with all existing Windows versions)
Serial RS232 cable (for connection between the converter and motrona unit)
One connector Sub-D-9 (male)
One connector Sub-D-9 (female)
Length 3 m (approx. 10 feet)
Windows driver CD enclosed
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Features
Solder connection
Metallised plastic enclosure
Mounting screws included
Features
Sub-D-9 connectors (male) on both sides
cable length 10 cm (approx. 3.4")
Features
Control input with format [HTL]
2 SSI inputs with format [RS422]
Cutt-off frequency 100 kHz ... 1 MHz
2 encoder inputs, short-circuit-proof
1 SSI output with format [RS422]
Power supply 12 ... 30 V DC
Current consumption (unloaded) 50 mA
Encoder supply 2 x 125mA (Vin – 2 V) short-circuit-proof
Delay / Output / Input100 ns
Operation temperature : 0 ... 45 °C (32 ... 113 °F)
SSI pause time min. 25 ns
Switching time is synchronized automatically with the next SSI break
Cascadable for more SSI encoders
All connections via pluggable screw terminal block
Snap-on housing for top-hat rail (according to EN 60715)
LEDs for indication of the input pulses
Dimension W x H x D = 22,5 x 121 x 112 mm (8.86 x 47.64 x 44.09'')
Plastic housing incl. plug
Features
2 pulse inputs with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422]
Input frequency up to 250 kHz for asymmetrical and up to 1 MHz for symmetric signals
2 control inputs for HTL / PNP signals [10 ... 30 VDC]
2 output channels with format A, B, Z [HTL] or A, /A, B, /B, Z, /Z [RS422], each output adjustable separately
Power supply 12 ... 30 VDC
Snap-on housing for top-hat rail (according to EN 60715)
Features
4 analog inputs for ±10 V or 0/4 ... 20 mA (2x current / 2x voltage)
optionally 3 control inputs for PNP signals [10 ... 30 VDC]
IO link interface
Power supply 12 ... 30 VDC
Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
Features
1 SSI input (10 … 32 bit)
for single-turn and multiturn encoders
optionally 3 control inputs for PNP signals [10 ... 30 VDC]
IO link interface
Power supply 12 ... 30 VDC
Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
Features
SSI input with format DATA+, DATA-, CLOCK+, CLOCK- up to 32 Bit
Impulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
3 control inputs (Hold) for PNP signals [10 ... 30 VDC]
Start-stop interface for absolute transducers and magnetostrictive sensors
Input frequency up to 1 MHz
25-bit parallel output push-pull in BCD, binary or Gray code format
Power supply 18 ... 30 VDC
Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
Features
Pulse input in format A, /A, B, /B, Z, /Z [RS422, HTL]
Pulse input in format A, B, Z [HTL]
Input frequency up to 1 MHz
Pulse output in format A, /A, B, /B, Z, /Z [RS422, HTL]
Pulse output in format A, B, Z [HTL]
Power supply 9 ... 30 VDC
Settings via DIL switches
Level conversion (RS422, HTL single-ended, HTL differential, TTL and vice versa)
Division of two-track A / B pulses with adjustable ratio 1: 1 to 1: 4096
Division of the Z pulse with adjustable ratio 1: 1 to 1: 256
External HTL signals for various functions
Implementation between the two types of representations for the direction of rotation (A / B 90 °, A/B Dir and vice versa, Division possible)
Snap-on housing for top-hat rail (acc. EN 60715)
Dimension (B x H X T) 22,5 x 102 x 102 mm
Page load link