Skip to content
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- Low profile 30.3mm
- Up to 12 pole commutation
- Thru-bore and hollow-bore (blind) styles
- Simple, innovative flexible mounting system
- Incorporates Opto-ASIC technology
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 2Ncm (typical)
- Inertia: 100gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Stainless Steel (316)
- Cover: Stainless Steel (316)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing + Single lip seal
- Rear: Single lip seal on the rear of the cover
- Protection: (IP66 / IP67)
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM
- Torque: 4Ncm (typical)
- Inertia: 200gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Size 25 / 63.5mm Diameter (Hollow Shaft)
- Up to 12 Pole Commutation Available
- Thru Bore and Blind Bore Options
- Simple, Innovative Flexible Mounting System
- Incorporates Opto-ASIC Technology
-
Features
- Thru-bore design for easy mounting
- Bore options to 1.375" and 32mm
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- 100° C operating temperature available
-
Features
- Slim profile—only 34.5mm in depth
- Thru-bore design for easy mounting
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- Bore options to 1.875" and 43mm
-
Features
- Industry-standard Size 20 (50.8mm diameter) stainless steel package
- Flange and servo mounting
- Up to 30,000 PPR
- 80 lb maximum axial and radial shaft loading
- IP67 sealing available
-
Features
- Industry-standard Size 58 (58mm diameter) stainless steel package
- Up to 30,000 PPR
- 36 Kg max. Axial and radial shaft loading
- 100° C operating temperature available
- IP65 sealing available
- Manufactured in Food Grade Stainless Steel
-
Features
- C-Face thru-bore encoder with stainless steel housing
- Fits NEMA Size 56C thru 184C motor faces (4.5" AK)
- Slim profile—only 25.4mm deep
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing
- Rear: Single lip seal on the rear of the cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 3Ncm (typical)
- Inertia: 600gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Number of output pulses per revolution 5.000 - 500.000 ppr
- Line number on disc (z) 5.000
- Maximum shaft speed 8000 rpm
- The permissible motion of the shaft
- axial: ± 1.00 mm
- radial: 0.02 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.8 kg
- Operating temperature -20...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- The permissible motion of the shaft
- axial: ± 0.5 mm
- radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
- 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
- Pulse inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
- 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
- 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
- Loop time approx. 250 µs
- Defining incremental dimensions via keyboard
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM300 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS connection via mMotrona gateway PB251
-
Features
- 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
- 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
- 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
- Loop time approx. 250 µs
- Defining incremental dimensions via keyboard or BCD decade switch on the front
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM600 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS connection via Motrona gateway PB251
- Dimension 96 x 96 x 140 mm (3,78 x 3,78 x 5,51")
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
- Analog output ± 10 V, 0/4 ... 20 mA, 16 bit
- Power supply 18 ... 30 VDC
- Compact housing for mounting on a 35 mm top-hat rail (according to EN 60715)
- Simple parameterization via the OS6.0 user interface
- Serial RS232 / RS485 interface
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- Hollow Shaft Small Size
- Resolution (Counts/Turn): 1,000∼12,000C/T
- Output Phase: A, B, Z, EU, EV, EW Phase
- Max Response Frequency: 200kHz
- Supply Voltage: DC+5V
- Consumption Current: 200mA Max
- Output Form: Line Driver
- Mounting Tolerance: Radial 0.05mm TIR Max, Axial 0.2mm Max, Shaft Runout 0.1°Max
- Starting Torque: 9.8×10-3N⋅m (100gf⋅cm Max)
- Protection: IP=40
- Operating Temp. Range: -20∼+85°C
- Vibration: 49m/s2(5G)
- Shock: 980m/s2(100G)
- Mass: 0.3kg Max
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors.
- Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of the angle.
-
Features
- Wide temperature range
- Superior environment resistance
-
- Vibration: 196m/s2{20G} at 10Hz .500Hz, for 2 hours to each of three axes.
- Shock: 981m/s2{100G} for 6ms, 3 times to each of 6 axes, 18 times in total
- Humidity: 90% RH or above at 60°C
- High-speed rotation
- High reliability - Extremely long life and high reliability are assured by the structure of mechanical parts and automated coil incorporation.
- Absolute position detection
- Long-distance transmission - Robustness against noise enables long-distance transmission
- Capable of compact incorporation - The use of built-in types of Smartsyn minimizes the housings of motors. Best suited for compact design
- Low cost
- Multipolarization is possible by increasing the multiplication factor of angle
Page load link