Skip to content
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- Very high-performance economical encoder
- Low profile—25.4 mm height and 38 mm diameter
- Thru-bore with sizes up to 10 mm
- Simple, innovative flex mounting system (Global Mounting Standards)
- Up to 12 pole commutation optional for brushless motor control
-
Features
- 5mm Opto-ASIC encoder with a low profile (50.8mm)
- Imperial bore sizes range from 0.625” to 1.125”
- Metric bore sizes ranging from 6 mm to 28 mm
- Single replacement solution for 50.8mm to 88.9mm encoders
- Resolutions to 10,000 PPR, frequencies to 1 MHz
- Versatile flexible mounting options
- RoHS compliant
- Corrosion-Resistant Option
-
Features
- Low profile 30.3mm
- Up to 12 pole commutation
- Thru-bore and hollow-bore (blind) styles
- Simple, innovative flexible mounting system
- Incorporates Opto-ASIC technology
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing - Rear: Single lip seal on the rear of cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 2Ncm (typical)
- Inertia: 100gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Body: Stainless Steel (316)
- Cover: Stainless Steel (316)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing + Single lip seal
- Rear: Single lip seal on the rear of the cover
- Protection: (IP66 / IP67)
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM
- Torque: 4Ncm (typical)
- Inertia: 200gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Size 25 / 63.5mm Diameter (Hollow Shaft)
- Up to 12 Pole Commutation Available
- Thru Bore and Blind Bore Options
- Simple, Innovative Flexible Mounting System
- Incorporates Opto-ASIC Technology
-
Features
- Thru-bore design for easy mounting
- Bore options to 1.375" and 32mm
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- 100° C operating temperature available
-
Features
- Slim profile—only 34.5mm in depth
- Thru-bore design for easy mounting
- Incorporates Opto-ASIC technology
- Resolutions to 4096 PPR
- Bore options to 1.875" and 43mm
-
Features
- Body: Precision Machined Aluminium
- Cover: Precision Machined Aluminium (Powder Coated)
- Shaft: Stainless Steel
- Bearings: Ballraces
- Shaft Sealing: Front: Sealed bearing
- Rear: Single lip seal on the rear of the cover
- Protection: IP65
- Operating Temp: -20 to +60°C (Higher on request)
- Maximum Speed: 3000 RPM (Higher on request)
- Torque: 3Ncm (typical)
- Inertia: 600gcm2 (typical)
- Shaft Loading: Designed to support its weight
- Cable: Screened, oil and salt waterproof
- Impulse Frequency: Up to 300KHz (depending on model)
- Current Consumption: 60mA (typical – without load)
-
Features
- Number of output pulses per revolution 5.000 - 500.000 ppr
- Line number on disc (z) 5.000
- Maximum shaft speed 8000 rpm
- The permissible motion of the shaft
- axial: ± 1.00 mm
- radial: 0.02 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.05T1 arc. sec
- Starting torque at 20°C ≤ 0.01 Nm
- Rotor moment of inertia < 20x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.8 kg
- Operating temperature -20...+70°C
- Storage temperature -30...+85°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (11 ms) ≤ 300m/s²
-
Features
- Number of output pulses per revolution 100-108000 ppr
- Maximum shaft speed 10000 rpm
- The permissible motion of the shaft
- axial: ± 0.5 mm
- radial: ± 0.05 mm
- Accuracy (T1-period lines on disc in arc. sec) ± 0.1T1 arc. sec
- Starting torque at 20°C ≤ 0.025 Nm
- Rotor moment of inertia < 1.5x10-4 kgm2
- Protection (housing) (IEC 529) IP64
- Protection (shaft side) (IEC 529) IP64
- Maximum weight without cable 0.3 kg
- Operating temperature -10...+70°C
- Storage temperature -30...+80°C
- Maximum humidity (non-condensing) 98%
- Permissible vibration (55 to 2000 Hz) ≤ 100 m/s²
- Permissible shock (5 ms) ≤ 1000 m/s²
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- Auxiliary voltage output 24 VDC or 5 VDC for encoder supply
- 8-decade LCD display (colour: red, green, yellow)
- Resistive touchscreen
- Standard housing with 96 x 48 mm and IP65 protection
- Intuitive and easy parameterization by plain text and touchscreen
- Numerous functions such as scaling, filter, zero offset, counting direction etc.
- Linearization with 24 interpolation points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined.
-
Features
- Control input with format [HTL]
- 2 SSI inputs with format [RS422]
- Cutt-off frequency 100 kHz ... 1 MHz
- 2 encoder inputs, short-circuit-proof
- 1 SSI output with format [RS422]
- Power supply 12 ... 30 V DC
- Current consumption (unloaded) 50 mA
- Encoder supply 2 x 125mA (Vin – 2 V) short-circuit-proof
- Delay / Output / Input100 ns
- Operation temperature : 0 ... 45 °C (32 ... 113 °F)
- SSI pause time min. 25 ns
- Switching time is synchronized automatically with the next SSI break
- Cascadable for more SSI encoders
- All connections via pluggable screw terminal block
- Snap-on housing for top-hat rail (according to EN 60715)
- LEDs for indication of the input pulses
- Dimension W x H x D = 22,5 x 121 x 112 mm (8.86 x 47.64 x 44.09'')
- Plastic housing incl. plug
-
Features
- 1 SSI input (10 … 32 bit)
- for single-turn and multiturn encoders
- optionally 3 control inputs for PNP signals [10 ... 30 VDC]
- IO link interface
- Power supply 12 ... 30 VDC
- Compact housing for mounting on 35 mm DIN rail (according to EN 60715)
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK- up to 32 Bit
- Impulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- 3 control inputs (Hold) for PNP signals [10 ... 30 VDC]
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- SSI clock frequency up to 1 MHz
- Analog output ±10 V or 0/4 ... 20 mA, 16 Bit
- Power supply 18 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via operator software OS6.0
- Serial RS232- / RS485 interface
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- Start-stop interface for absolute transducers and magnetostrictive sensors
- USB interface and RS232/RS485 interface for configuration and serial readout
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
- SSI clock frequencies up to 1 MHz
- Master or Slave operation
- For single-turn and multi-turn encoders with 10 … 32 Bit
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent color variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Operating modes such as scaling and bit blanking
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputsOptions can be combined.
-
Features
- SSI input with format DATA+, DATA-, CLOCK+, CLOCK-
- SSI clock frequencies up to 1 MHz
- Master or Slave operation
- For single-turn and multi-turn encoders with 10 … 32 Bit
- 3 control inputs for HTL / PNP signals
- Power supply 18 ... 30 VDC
- 5 / 24 V auxiliary output for encoder supply
- 3.78 x 1.89-inch norm panel housing and IP65 protection
- Bright and high-contrast display with event-dependent color variations
- Emulation of a 7-segment display inclusively icons and units
- Intuitive and easy parameterization by plain text and touchscreen
- Operating modes such as scaling, bit blanking and wire break monitoring
- Linearization with 24 control points
Options
- Option AC: Power supply 115 ... 230 VAC
- Option AO: 16-bit analog output, 4 control outputs, serial RS232 interface
- Option AR: 16-bit analog output, 4 control outputs, serial RS485 interface
- Option CO: 4 control outputs, serial RS232 interface
- Option CR: 4 control outputs, serial RS485 interface
- Option RL: 2 relay outputs
Options can be combined
-
Features
- 4 pulse inputs with format A, /A, B, /B [RS422]
- 4 scalable 12-bit analog inputs for ±10 V or 0/4 ... 20 mA
- 8 control inputs for PNP signals [10 ... 30 VDC]
- 4 scalable 12-bit analog outputs for ±10 V or 0/4 ... 20 mA
- Short loop time (depending on application)
- Power supply 18 ... 35 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Setup via Windows operator software (free of charge)
- OnBoard interfaces: RS232 and CANopen
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- SSI input in the format DATA +, DATA-, CLOCK +, CLOCK- up to 32 bits
- 3 control inputs (hold) for PNP signals [10 ... 30 VDC]
- Pulse inputs A, B [HTL], A, / A, B, / B [RS422, HTL]
- Input frequency up to 1 MHz
- 25-bit parallel output push-pull in BCD, binary or Gray code format
- Power supply 18 ... 30 VDC
- Compact housing for mounting on 35 mm top-hat rail (according to EN 60715)
-
Features
- 20-bit parallel input with format BCD, binary or Gray-Code
- Input frequency: fast encoder 5 kHz, auto-transmit / data logging 0.5 kHz
- 4 status outputs, with push-pull characteristics, short-circuit-proof [5 ... 30 VDC]
- Power supply 10 ... 30 VDC
- Snap-on housing for top-hat rail (according to EN 60715)
- Serial RS232 / RS485 interface
-
Features
- 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
- 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
- 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
- Loop time approx. 250 µs
- Defining incremental dimensions via keyboard
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM300 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS connection via mMotrona gateway PB251
-
Features
- 2 pulse inputs with format A, B, 90° [HTL] or A, /A, B, /B [RS422]
- 4 control inputs for HTL / PNP / NPN / Namur signals [10 ... 30 VDC]
- Input frequency up to 300 kHz
- 4 fast transistor outputs, push-pull, short-circuit-proof [5 … 30 VDC]
- 1 scalable 14-bit analog output (±10 V or 0/4 … 20 mA)
- Loop time approx. 250 µs
- Defining incremental dimensions via keyboard or BCD decade switch on the front
- Power supply 24 VAC and 17 … 40 VDC
- Compact norm panel housing (according to EN 60715)
- Top hat rail mounting by using SM600 support brackets (option)
- Setup via keys or via PC by serial RS232 interface
- PROFIBUS connection via Motrona gateway PB251
- Dimension 96 x 96 x 140 mm (3,78 x 3,78 x 5,51")
-
Features
- Start-stop interface for absolute transducers and magnetostrictive sensors
- Adjustable frequency of the init pulses from 62.5 Hz to 5 kHz
- Analog output ± 10 V, 0/4 ... 20 mA, 16 bit
- Power supply 18 ... 30 VDC
- Compact housing for mounting on a 35 mm top-hat rail (according to EN 60715)
- Simple parameterization via the OS6.0 user interface
- Serial RS232 / RS485 interface
- Pulse inputs A, B [HTL], A, /A, B, /B [RS422, HTL]
- SSI input DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32 Bit
- USB interface and RS232/RS485 interface for configuration and serial readout
Page load link