Skip to content
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 500 kHz
- 2 output relays with potential-free change-over contact (forward, reward and zero motion)
- 2 transistor outputs with High-Side-Driver, short-circuit-proof
- Power supply 17 ... 30 VDC
- Snap-on housing for top hat rail (according to EN 60715)
- DIL switch for setup of input characteristic and definition of standstill
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 1 MHz
- 3 output relays
- 14 Bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 1 MHz
- 3 fast transistor switching outputs [PNP]
- 14 bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 1 MHz
- 14 bit analog output for ±10 V or 0/4 ... 20 mA
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 1 MHz
- 3 output relays
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
-
Features
- Pulse input with format A, B, 90° [HTL] or A, /A, B, /B [RS422], also possible for single-channel
- Input frequency up to 1 MHz
- 3 output relays
- Power supply 17 ... 30 VDC
- Auxiliary voltage output +5 V for the supply of TTL encoders
- Snap-on housing for top hat rail (according to EN 60715)
- LCD display, backlighted
- Setup via keys or via PC by serial RS232 interface
-
Features
- Ultra Miniature Size
- High reliability with mounting the Opt-ASIC (by components quantities decreased)
- Low torque and low inertia
- High signal accuracy
- Type: 12SA
- Pulse: 100-256
- Outer Diameter: φ12
- Ingress Protection: IP00
-
Features
- Ultra Miniature Size
- Shaft Diameter of 2.5mm available
- Type: 18M
- Pulse: 200-1600
- Outer Diameter: φ18
-
Features
- Ultra Miniature Size
- A shaft Diameter of 2.5mm is available
- Type: 18S
- Pulse: 100-1600
- Outer Diameter: φ18
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38H
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38S
- Pulse: 100-4096
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Compact size for general purpose
- Type: 38SG
- Pulse: 100-2048
- Outer Diameter: φ38
- Ingress Protection: IP50
-
Features
- Ultra-miniature size
- OD 7.2mm
- Height 10.5mm
- High Resolution
- Up to 400 resolution
- Pulse: 100~400
- Type: 7s
- Outer Diameter: φ7
-
Features
- Compact high-speed type
- Type: OEZ
- Pulse: 36-1500
- Outer Diameter: φ28
- Ingress Protection: IP50
Page load link